Maintenance And Cleaning; Declaration Of Conformity - Würth SHG 12-700 Guia De Inicio Rapido

OBJ_BUCH-0000000118-001.book Page 10 Thursday, March 14, 2013 11:55 AM

Maintenance and Cleaning

 Before any work on the machine itself,
pull the mains plug.
Before storing the BOOSTER, fully charge it; after-
wards, recharge every 4 months.
If the device should fail, despite the care taken in man-
ufacturing and testing procedures, repair should be
carried out by a Würth masterSERVICE.
In all correspondence and spare parts orders, please
always include the article number given on the type
plate of the battery charger.
The current spare parts list for this device can be
viewed on the Internet at
"http://www.wuerth.com/partsmanager" or be
requested from your next Würth branch office.
Guarantee
For this Würth device, we provide a guarantee in
accordance with the legal/country-specific regulations
from the date of purchase (verified by invoice or deliv-
ery document). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the device is sent undis-
assembled to a Würth branch office, your Würth sales
representative or an authorised customer service agent
for Würth compressed-air and power tools.
Disposal
The device, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of the device into household waste!
Only for EC countries:
According to the European Guideline
2012/19/EU for Waste Electrical and
Electronic Equipment and its implemen-
tation into national right, power tools
that are no longer usable must be col-
lected separately and disposed of in an environmen-
tally correct manner.
Battery Packs/Batteries:
Do not dispose of battery packs/batteries into house-
hold waste, fire or water. Battery packs/batteries
should be collected, recycled or disposed of in an envi-
ronmental-friendly manner.

Declaration of Conformity

We declare under our sole responsibility that this prod-
uct is in conformity with the following standards:
EN 60335-1:2012, EN 60335-2-29:2004/A2:2010
in accordance with the Directives 2002/95/EC,
2004/108/EC, 2006/95/EC.
Technical file at:
Würth International AG
Aspermontstrasse 1
CH-7004 Chur
SWITZERLAND
Gerd Rössler Patrick Kohler
Managing Director Department Manager
Category Management
Chur: 29.01.2013
Subject to change without notice.
10