General Information/Assembly/Dimension Tables/Product Description/Height Adjustment/Legrest/Transport - Etac Swift Mobil Manual Del Usuario

EN
General information
Thank you for choosing a shower chair from Etac.
In order to avoid injury during handling and use, please
read through this manual first.
In the manual, the user is the person sitting in the chair.
The assistant is the person operating the chair.
Swift Mobil is a shower and toilet chair intended to
make hygiene care easier for people with reduced mobility
and their carers.
Swift Mobil has been tested by a testing institute and
complies with the requirements stated in EN ISO 10993-1
and SS EN 12182.
It is designed for use in showers, with hand basins and
over toilets, as well as for transport to and from the sanitary
room. Every component of the chair is designed to make
things easier for users and assistants.
This symbol appears in the manual along with text. It
indicates instances where the safety of the user or the
assistant may be at risk.
Assembly/Dimension table
fig. A fig. F
Product description
fig. B
1 Bolt
2 Legrest
3 Seat
4 Armrest
5 Backrest upholstery
Height adjustment
fig. C
The height can be adjusted with ease by positioning the
bolt in the required position (fig. C 1).
Swift Mobil is height-adjustable between 45 and
60 cm (fig. C 2).
Check that both sides are similarly adjusted, other-
wise stability will be reduced. Do not use the chair if
the bolt (orange) is not locked (fig. C 3).
Legrest
fig. D
The assistant can easily raise and swivel the legrests to the
side for the user to sit down in or get up out of the chair
(fig. D 1). The footrests are detachable.
Various height adjustment options are available by
moving the locking pin (fig. D 2). The legrests have 6 dif-
ferent height settings.
Transport
1. Make sure that at least two of the
wheels are locked whenever the user is
sitting down in or getting up out of the
chair.
2. The legrests should be swivelled to the
side whenever the user is sitting down
or getting up.
Negotiating thresholds:
1. Chair only: Place one foot on the rear chassis tube.
2. With a user: move the chair backwards. Ensure that the
castors are facing in the direction of travel.
12