Drain Valve; Reset Function - Masterbuilt ButterBall MB23010618 Manual De Operación E Instrucciones De Seguridad

MAX FILL
LINE
ELEMENT
VALVE
SPOUT
RESET
BUTTON
CAVITIES
7
HOW TO STEAM USING APPLIANCE
• Add water to Max fill line. Do not add water past this line. Do
nnot allow water to completely evaporate. This will cause element
ttto overheat and damage the unit. Make sure basket is in place,
aas shown on left, to steam.
• Water will boil at 212°F (100°C). When steaming or boiling
turn dial to 375°F (191°C) to ensure unit will not cycle and
water will continue boiling.

DRAIN VALVE

• Valve must be in OFF position.
DRAIN
VALVE
• Remove safety cap on drain valve.
• Screw valve spout attachment onto drain valve. Do not
overtighten. This could damage threads and cause leakage.
If spout becomes snug in the up position turn counterclockwise
until it is in the down position.
• Align spout over container with opening facing downward.
O Open valve to drain.
• Close valve when complete.
• Do NOT store water in appliance.

RESET FUNCTION

• Your appliance is equipped with an overheat safety feature.
• If appliance overheats it will shut off automatically.
• To reset appliance, unplug from outlet and remove control
panel. Insert a toothpick into small hole found on inside of
control panel. Push button. This will reset unit.
CAVITIES
• Cavities in unit are designed to catch grease and
condensation from steam. Wipe out cavities using
damp cloth after each use.
• When steaming, cavities may become full before
finished cooking, drain with sponge or other
absorbent material. Caution! Water will be hot.