Statement Of Conformity; Maintenance; Replacing The Batteries - Greenlee 5124 Manual De Instrucciones

Statement of Conformity

Greenlee Tools, Inc. is certified in accordance with ISO 9001 (2000) for our Quality Management Systems.
The instrument enclosed has been checked and/or calibrated using equipment that is traceable to the National
Institute for Standards and Technology (NIST).

Maintenance

To prevent damage to the 5124:
Repair or maintenance of the 5124 should only be performed by Greenlee authorized technicians.
Do not use corrosive or solution since those substances will cause damage to the chassis of the 5124.
Prior to cleaning, remove all test leads from the 5124.
Electric shock hazard:
To prevent electric shock, it is necessary to remove all testing leads from the 5124 prior to replacing
the battery.
The 5124 contains a 9V/6F22 battery, do not discard the battery with other solid wastes. The used battery
should be disposed of properly in accordance with local government regulations.

Replacing the Batteries

1. Remove all testing leads from the 5124.
2. Take off the protective casing.
3. Place the 5124 face down on a non-abrasive surface and
unscrew the battery cover.
4. Remove the battery cover and remove the battery after
loosening the battery buckle.
5. Replace the battery as shown in Figure 3.
Ensure that the battery polarity is correct.
6. Reinstall the battery cover with screws.
7. Put the protective casing back over the 5124.
8
Figure 3