Menu Settings; Selecting The Osd Language; Programme Setting; Automatic Station Search - Disney TV-Princess Manual Del Usuario

Disney-TV-Princess_MD3723-22.book Seite 12 Montag, 14. Juni 2004 4:33 16
M
ENU SETTINGS
OSD Language
The menu language used in these instructions is English.
You can also set the OSD (on-screen display) to German, French, Italian or Spanish.

Selecting the OSD Language

• Press the MENU key. The OSD menu will appear
• Using the
• Confirm with . The language menu will be displayed.
• Using the
selecting a language the menu changes immediately.
• To close the on-screen menu, press MENU again.

Programme setting

With the automatic programme search, all receivable programmes are
saved sequentially under programme numbers 1 to 80.
• Press the MENU key. The OSD menu will appear.
• Using the

Automatic station search

• Select AUTO and confirm with
matic station search will start:
each station found is briefly displayed and
stored under a programme number. The
programme number (CH 1, CH 2 ...)
appears at top right.
The initial search is for PAL transmitters (TV
standard in most European countries), followed by SECAM-L (TV standard in France).
1. If no entry is made for 60 seconds, the menu disappears from the screen.
2. On the screen, you can use the programme select buttons to navigate up and down and
the "volume +" button for the "enter" function.
GB-12
1
2
keys, select LANGUAGE .
buttons, select the desired language. When
buttons, select CH TUNING. Confirm with
. Auto-
.
.