Feeding Tape; Feed & Cut; Feed Only - Brother P-touch PT-2100 Guía De Usuario

GETTING STARTED
Feed & Cut
This function will advance the tape approximately 0.92" (23 mm) and then cut the tape,
resulting in a blank label. This action maybe needed when installing a new tape
cassette to remove a bend in the tape and or ensure correct feeding of the tape.
Hold down the
1
"Feed & Cut?" will appear on the LCD display.
Using the
2
The message "Feeding Tape... Please Wait" appears while the tape is fed, and
then the tape is cut.
To exit or cancel this function press

Feed Only

This function will advance the tape approximately 0.92" (23 mm) resulting in a blank
label sticking out the tape cassette. This action is recommended when using Fabric and
Extra Strength Adhesive tapes, which should be cut using scissors.
Hold down the
1
"Feed & Cut?" will appear on the LCD display.
Using the
2
The message "Feeding Tape... Please Wait" appears while the tape is fed.
To exit or cancel this function press
22

Feeding Tape

Feeding Tape
key and press the
or select the "Feed & Cut" option and then press either
key and press the
or select the "Feed Only" option and then press either
key.
.
key.
.
or .
or .