WEG CFW100 - IOADR Guía De Instalación, Configuración Y Operación página 11

Figure 1: Remote Control (infrared)
Table 4: Operation of the remote control keys
Key
(*) Function available when SoftPLC application is installed.
Otherwise, this key has no function.
(**) Browse mode in CFW100 display only available through
remote control with the motor stopped.
Infrared Remote Control and I/O
Description
Start/Stop Motor.
Browse CFW100 display.
Browse CFW100 display.
Commute view between P842 and
P843 parameters.
Confirm / Program parameter on the
CFW100 display.
Special Function 1.
Special Function 2.
Special Function 3.
Expansion Module
(**)
(**)
(**)
(*)
(*)
(*)
CFW100 | 11