WEG CFW100 - IOADR Guía De Instalación, Configuración Y Operación página 12

Infrared Remote Control and I/O
Expansion Module
NOTE!
When the NTC sensor is not connected to the
accessory, the CFW100 frequency inverter will
show 999 °C (1830 °F) in parameter P375.
If pins 6 and 7 (accessory connector) are
short circuited, the value shown in P375 will
be 0 °C (32 °F).
ATTENTION!
Some keys of the remote control have different
functions according to the operating status of
the CFW100 frequency inverter.
12 | CFW100