Wiring Requirements - Kohler K-4737 Manual Del Propieratio

Ocultar thumbs Ver también para K-4737:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

12"
(30.5 cm)
Grounding Pin
Preferred Connection

Wiring Requirements

WARNING: Risk of electric shock, fire, or personal injury.
This product must be grounded and connected only to a
dedicated, nominal 120 VAC, 60 Hz circuit protected by a
minimum 15 A Ground-Fault Circuit-Interrupter (GFCI) or
Residual Current Device (RCD). If the product is not
grounded or a higher voltage circuit is used, electric shock,
fire, or personal injury may occur.
NOTICE: This product is factory equipped with a specific electrical
cord and plug to permit connection to a proper electric circuit. Make
sure that the product is connected to an outlet having the same
configuration as the plug. Do not use an adapter with this product.
Do not modify the plug provided – if it will not fit the outlet, have
the proper outlet installed by a qualified electrician. If the product
must be reconnected for use on a different type of electric circuit, the
reconnection should be made by qualified service personnel.
NOTICE: Do not use an extension cord with this product.
NOTICE: Consult your local electrical codes before determining the
connection type and the electrical outlet location. The temporary
connection may not be permitted by local electrical codes and the
electrical outlet location may be specified.
NOTICE: Do not plug in the seat until instructed to do so. This will
avoid possible product malfunction.
Kohler Co.
Adapter
Cover Screw
Temporary Connection
7
Grounding
Screw Tab
1097712-5-A

Publicidad

Tabla de contenido
loading

Tabla de contenido