Aleratec 1:3 DVD/CD Auto Publisher LS Guia De Inicio Rapido página 13

4. Use the "Right" and "Left" arrow icons to move the robotic
arm clockwise and counterclockwise, respectively. Adjust this
position as close as possible to the center of the disc and click
"Accept", then "OK."
5. You will be prompted to save the alignment parameters to a
configuration file. Type a name for this file in the "File name"
box and then click "Save."
6. When Droppix asks if you would like to apply the settings as
default, click "Yes." The current alignment parameters will
then be stored in the autoloader.
7. Place a disc in the top recorder's tray, then close the tray.
Click on the "Calibration..." button to continue adjusting the
alignment parameters.
8. Use the "Angle of Robotic Arm" option once again to make
any further necessary refinements.
www.aleratec.com 11