❸ Use; I Control Box Presentati On; I Checks Before Commissioning - Zodiac pH expert Manual De Instalación Y De Uso

❸ Use

3.1 I Control box presentati on

Acti vate sensor calibrati on mode (press and hold for 5 seconds)
-
Confi rm a choice in the "Setti ngs" menu
-
Cancel the "OFA" over feed alarm
-
View the set point value (press and hold for 5 seconds)
-
Exit the "Setti ngs" menu
-
Scroll up or down through the "Setti ngs" menu
-
Acti vate the "Priming" functi on (press and hold the up butt on for a long ti me)
-
Acti vate "Boost" mode (press both butt ons at the same ti me)
-
0-1 Master switch to power the appliance on and off
-
Thanks to its double electrical supply, the appliance is always powered on, even if fi ltering
is stopped, making it possible to view the water pH level at all ti mes. The sensor can also be
calibrated when fi ltering is stopped.
The appliance can be powered off at all ti mes using the 0-1 switch on the side of the appliance.

3.2 I Checks before commissioning

• The sucti on tube must be immersed with the sucti on cane in the container of product to be injected, and
is connected to the peristalti c pump (left side).
• The injecti on tube is connected on the one hand to the peristalti c pump (right side) and on the other hand
to the pool discharge pipe via the injecti on valve.
• The peristalti c pump cover must be refi tt ed using its fi xing screw.
EN
9