Rollei 40308 Guia Del Usuario página 12

12 2. Power ON / OFF
Turn on: Press and hold the power button for about 2 seconds, until you hear a beep sound.
The display screen will be lighted, as shown below, indicating the product is ready to work (the
default work mode after turning the device on is the recording mode).
WELCOME
Important:
• If you are not able to turn on the camera, try to charge the device. If the blue indicator light is
turned on during charging, the product is in charging mode. Try to turn on the device again,
after the battery is fully charged. If the device cannot be turned on, even when it is fully
charged, please contact our customer service.
GOODBYE
used, the camera will automatically shut down when it is in power-save-mode (default).
3. Charging
Use the included USB cable for charging the camera. During charging, the indicator light will
shine in blue. When charging is completed, the blue indicator light turns off.
Important:
• If another charger is used, check the output power before to ensure that it really fits to the
camera (5 V/1 A ~ 5 V/2 A).
4. Video recording or photo shooting
This camera has a video mode and a photo mode. After turning on the camera, press the MODE
button (power button) to switch between the different modes. The corresponding mode icon will
be shown on the screen.
00:00:01
01 / 01 / 2016 12:00
02:43:52
01 / 01 / 2016 12:00
00:00:01
01 / 01 / 2016
Turn off: After shooting is done, press and hold the power button for about
3 seconds to turn the camera off. The display will show "GOODBYE" and
turns off. If there is no operation for about 3 minutes when the camera is
Video: In the video mode, press the shutter button to start recording. The
video recording time is shown on the display.
Stop recording: During recording, press the shutter button to stop the
recording. The video will automatically be saved on the memory card in your
camera. At that moment, the display screen will show the remaining time
available for recording.
ENGLISH
12:00