Rollei 40308 Guia Del Usuario página 18

18
Technological parameters
Image sensor
Functional mode
Lens
Video resolution
Picture resolution
File format
Storage medium
USB interface
Power supply
Size
Instructions for use
• The product is equipped with a built-in battery. Do not put the camera directly into fire, or it
may cause explosion or other dangers.
• The product may radiate heat due to long-time use or exposure to direct sunlight. This is
normal.
• If the camera stops working or fails to respond to any operation during use, use a needle to
press and hold Reset button for about 3 seconds to restart the product.
• Do not use the camera under any environment with temperatures lower than -10°C or
higher than 40°C. Otherwise it may not turn on normally. Please note that if you are using the
camera under 0°C the battery power will be reduced approximately by 40%.
• Do not use the camera in humid places, as the humidity may damage important parts of the
camera.
• Do not put the camera directly into water as it is not waterproof.
• Do not use the camera during charging as it may cause system failures due to improper heat
radiation.
• Do not contact the lens with hard or sharp items to avoid any damage.
2x 4.0 M (CMOS)
Video recording & photo shooting
F= 2.0 | f= 1.95 mm
1920 x 960 (30fps)
3008 x 1504
Video H.264 (MOV) | Image JPG
Micro SD card (32 GB recommended, not included)
High-speed USB2.0 interface
Built-in high voltage lithium battery 1500mAh
116 x 34 x 28.4 mm
ENGLISH