Tabla de contenido
Publicidad
Overview
The RT-7690 series are self-leveling, remote-controlled, simultaneous level and
plumb rotational laser systems. Its' level and plumb laser beams can be independ-
ently controlled from the base unit or RF remote control.
A remote control with built-in laser detector allows for laser beam detection under
lighting conditions where beam visibility is poor.
This guide describes the features and operation of the RT-7690 series laser sys-
tems. Important warranty and safety information is also included.
Features
The RT-7690 series laser systems includes the following:
Base Unit
•
Level and plumb laser beams, with independent and simultaneous
operation
•
Accuracy
- Level - ±1/8 in. (3 mm) at 100 ft. (30m)
- Plumb - ±1/4 in. (6.4 mm) at 100 ft. (30m)
•
Level and plumb self-leveling range - ±6°
•
Laser diode output
- RT-7690-2XP: up to 5mW output for each of the diodes
- RT-7690-2: 2mW output for each of the diodes
•
Spin mode
- Variable rotation speeds: 350, 600 and 1200 rpms
•
Dot/Line Dither/Scan mode (level or plumb), for higher beam visibility
- Dither angles - six line lengths - 3-120°
•
End-user calibration
•
Pendulum lock mechanism for protection during transport and storage
•
Out-of-level indicator
•
Automatic power standby, with override
•
Low battery indicator
•
Built-in tripod mount - 5/8" x 11, for standard surveyor's tripods,
such as the RoboToolz RT-A1150 tripod or RT-A1150-123 tripod™.
RF Remote Control/Laser Detector
•
RF remote control range -
•
Laser detector range -
•
Laser beam functions, controllable from the base unit or RF remote
control
•
Last command sent confirmation
•
Laser beam locator, with fine/coarse resolution selection
•
Low battery indicator
Accessories
•
Rod bracket (for RF remote control/laser detector)
•
Laser target
•
Laser enhancement glasses
RT-7690-2XP: 300 ft. (160m)
RT-7690-2: 300 ft. (91m)
RT-7690-2XP: up to 500 ft. (160m)
RT-7690-2: up to 300 ft. (91m)
3
Publicidad
Capítulos
Tabla de contenido
