Description; Specifications - Campbell Hausfeld CHN50300 Instrucciones Para El Manejo

Operating Instructions and Parts Manual
Flooring
Nailer/Stapler

Description

This flooring nailer/stapler is designed for use in installing 1/2 inch to 3/4 inch thick
unfinished and prefinished hardwood flooring. Caution must be used so the finish is
not damaged by the tool.
Figure 1 - CHN50300 Flooring Nailer/Stapler

Specifications

Model CHN50300
Requires: 0.7 Avg SCFM using 10
fasteners per minute at 90 psi
Air Inlet: 1/4 inch NPT
Fastener Size Range:
• 1-1/2 in. to 2 in.,
16 gauge L-Cleats
• 1-1/2 in. to 2 in.,
15.5 gauge 1/2 in. Crown
Flooring Staples
Magazine Capacity: 110 fasteners
Weight: 10 lbs.
Length: 16-1/2 inches
Height: 23 inches
Maximum Pressure: 90 psi
Pressure Range: 70 psi to 90 psi
Locate model number on magazine and
date code on tool body. Record below:
Model #: _____________________________
Date Code: ___________________________
Retain these numbers for future reference.
www.chpower.com
3