Descargar Imprimir esta página

Safety Guidelines; Safety Symbols; Important Safety Information; Instructions Pertaining To A Risk Of Fire, Electric Shock, Or Injury To - Campbell Hausfeld CHN50300 Instrucciones Para El Manejo

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Instructions and Parts Manual

Safety Guidelines

This manual contains information
that is very important to know
and understand. This information
is provided for SAFETY and to
PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates
an imminently
hazardous situation which, if not avoided,
WILL result in death or serious injury.
Warning indicates
a potentially
hazardous situation which, if not avoided,
COULD result in death or serious injury.
Caution indicates
a potentially
hazardous situation which, if not avoided,
MAY result in minor or moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
IMPORTANT: Information that
requires special attention.

Safety Symbols

The following Safety Symbols appear
throughout this manual to alert you
to important safety hazards and
precautions.
Wear Eye
Read Manual
and Mask
First
Protection
Risk of Falling
Wear Eye
Protection
Risk of Personal
Injury

www.chpower.com

Important Safety Information

INStruCtIoNS PertaININg to a rISk oF FIre, eleCtrIC SHoCk, or INjury
to PerSoNS
This manual contains important safety, operational and maintenance information. If
you have any questions, please call 1-800-543-6400 for customer assistance.

CalIForNIa ProPoSItIoN 65

harm. Wash hands after handling.
other masonry. This dust often contains chemicals known to cause cancer, birth
defects, or other reproductive harm. Wear protective gear.

geNeral

a. To reduce the risks of electric shock, fire, and injury to persons, read
all the instructions before using the tool. Failure to follow warnings,
dangers, and cautions could result in DEATH or SERIOUS INJURY.
b. Be thoroughly familiar with the controls and the proper use of the
equipment. Follow all instructions. Contact your Campbell Hausfeld representative
if you have any questions.
c. Only persons well acquainted with these rules of safe operation should be allowed
to use the unit.
on the nailer magazine and body.
the work area in case of accidental discharge of nails. Do not point the tool toward yourself or
anyone whether it contains fasteners or not. Accidental triggering of the nailer could result in
death or serious personal injury.
shields or guards are removed or altered. Do not use the nailer as a hammer. Personal injury or
tool damage may occur.
Risk of
Explosion
Tool performance or durability may be reduced.

Work area

a. Keep the work area clean and well lighted. Cluttered benches and dark areas
Wear Hearing
Protection
increase the risks of electric shock, fire, and injury to persons.
b. Do not operate the tool in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. The tool is able to create
sparks resulting in the ignition of the dust or fumes.
c. Keep bystanders, children, and visitors away while operating the tool.
Distractions are able to result in the loss of control of the tool.
When using tools, basic precautions should always be followed,
including the following:
This product or its power cord may contain chemicals known to the State
of California to cause cancer and birth defects or other reproductive
You can create dust when you cut, sand, drill or grind
materials such as wood, paint, metal, concrete, cement, or
Do not operate or allow anyone else to operate the nailer if any warnings
or warning labels are not legible. Warnings or warning labels are located
Always assume the nailer contains nails. Respect the tool as a working
implement; no horseplay. Always keep others at a safe distance from
Do not make any modifications to the tool without first obtaining
written approval from Campbell Hausfeld. Do not use the nailer if any
Clean and check all air supply hoses and fittings before connecting the
nailer to an air supply. Replace any damaged or worn hoses or fittings.

Publicidad

loading