Technical Data; Electric Fry-Top; Technical Characteristics; Installation Instructions - Diamond E99/PRA1 Instrucciones Para La Instalación, El Uso Y El Mantenimiento

1.
1.1 ELECTRIC FRY-TOPS
MODEL
E99/PLA1
E99/PLCA1
E99/PRA1
E99/PLA2
E99/PLCA2
E99/PMA2
E99/PMCA2
L = Smooth plate
*SUPPLY VOLTAGE: 3N AC 415 V; 3 AC 240 V; 1N 240 V 50/60 Hz.
N.B.: The input power with 3N AC 380 V; 3 AC 220 V; 1N 220 V 50/60 Hz is approximately 16% lower.
The input power with 3N AC 400 V; 3 AC 230 V; 1N 230 V 50/60 Hz is approximately 8% lower.
1.2

TECHNICAL CHARACTERISTICS

Frame made of AISI 304 stainless steel, mounted on height-adjustable feet and with a rubber platform.
COOKING PLATE made of special steel with high thermal conductivity, in smooth and fluted versions, with splash guard
made of 18/10 stainless steel; C version with chrome worktop.
DRIP TRAY made of AISI 304 stainless steel.
ELECTRIC HEATING with armoured electrical heating elements.
INDEPENDENT CONTROLS for every plate zone for differentiated temperatures on EFT90 models.
2.
Installation must be performed by qualified persons in accordance with current regulations.
WARNINGS:
If the oven is installed against a wall, the wall needs to withstand temperatures of 100°C and must be fireproof.
Before proceeding with the installation, remove the protective plastic film and eliminate any adhesive residues by means of
a suitable product for cleaning stainless steel.
Install the oven horizontally, correct positioning is obtained by turning the levelling feet.
If the unit is installed on its own, it is advisable to secure it to make its stability safer.
GB
DIMENSIONS in mm.
esternal
WxDxH/H max.
450x900x850
450x900x850
450x900x850
900x900x850
900x900x850
900x900x850
900x900x850
R = Fluted plate
POWER
INPUT
plate
TOTAL*
WxD kW
375x710 6
375x710 6
375x710 6
825x710 12
825x710 12
825x710 12
825x710 12
LR = 50% smooth 50% fluted plate

INSTALLATION INSTRUCTIONS

- 12 -

TECHNICAL DATA

WEIGHT
NET
kg
80
80
80
80
140
140
140
Tab. 1
C = Chrome plate