1 – PRESENTATION
The AQUA-BASE range XA desalination unit is composed of :
- a main module assembled in a compact frame, which includes the pump, the R/O treatment module, the electrical circuit and its
control panel,
- a power electric box,
- a sea water filter,
- a booster pump,
- pipes, fittings and fixation components necessary for installation,
- Hull fitting and hull valve are not included in the supplies.
In order to make installation easier in inaccessible or particularly cramped areas, to improve utilisation convenience, it is possible to :
- separate the R/O module from the main module, in which case a separation kit can be supplied,
- deport the control panel by using a kit which groups together all the necessary components to that end.
- Option :
Flushing system (automatic),
Separation kit,
Remote panel,
2 – CHARACTERISTICS
TYPE
Dry mass
Nominal capacity
Maximal capacity
Pressure
Pipes
Feeding
Reject
Production
Air bleed
Voltage
Elec. Consumption
(1) The pressure is adjustable, to optimise performances, according to operating conditions.
(2) The nominal capacity is given for a new unit, nominal membranes performances, operating in standard sea water TDS 35000ppm (35g/l) and temperature
25°C. The capacity can vary from +/-15%, according to allowances given by the membranes manufacturers.
(3) This flow is the maximum authorized. Pressure should be adjusted in order not to exceed this : it should particularly be reduced as soon as the sea water
salinity noticeably decreases, notably at river mouths.
See the General Layout XA in ANNEXES page 48.
See the On board installation XA in ANNEXES page 49.
A – THE WATERMAKER
XA111 / 221
Kg
(2)
l/h
(3)
l/h
(1)
bar
A / B / C / D
mm
G / H
mm
K / M
mm
Q
mm
Vcc
kW
J:\Etude-3d\Aquaset\0-DOSSIER TECHNIQUES\1-sw-plaisance\AQUA-BASE X 2008\09-Manuel utilisateur\AQUABASE XA FRUKES 02-2009-D.doc
XA112 / 222
38
44
30
60
35
70
40 to 70
19 x 26
8 x 13
8 x 13
4 x 6
115/2/50.60 or 220/1/50
1
XA113 / 223
50
90
100
FR/UK/ES Page 18/18
VERSION 2009-02-D