GETTING STARTED (Cont.)
Inserting/ejecting the SmartMedia card
Be sure to use a 3V (3.3 V) card. Non-Olympus 3 V (3.3 V) cards must be
formatted with the camera. Do not use a 5 V card or a 2 MB card.
Inserting a SmartMedia removable
3
memory card
Insert the card fully with the contact area
facing towards the monitor side (back of
the camera). Push the card down firmly,
being careful not to bend it. The card will
lock into position and not pop back up
when properly inserted.
● Note the orientation of the card. If it is
inserted incorrectly, it may become
jammed.
3
Ejecting the card
Push the card in lightly to unlock it, then
pull it out.
16
Make sure the camera is turned off (i.e. the mode
1
dial is set to OFF).
Open the Card cover.
2
4
Close the cover tightly.