Olympus CAMEDIA C-3020ZOOM Manual De Usuario página 18

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GETTING STARTED (Cont.)
6
When
is selected in green on
the screen, press
the date format.
● Select any one of the following
formats:
D-M-Y (Day/Month/Year)
M-D-Y (Month/Day/Year)
Y-M-D (Year/Month/Day)
● This step and the following steps show the
procedure used when the date and time
settings are set to Y-M-D.
í
7
Press
to move to the year (Y) setting.
Ññ
8
Press
to set the year. When the year is set, press
the month (M) setting.
● Repeat this procedure until the date and time are completely set.
● To move back to the previous setting, press
SELECT
SET
9
Press
.
● The camera returns to the menu screen.
● If
is pressed again, the menu disappears.
● For more accurate setting, press
starts when you press the button.
● The current settings stay the same even when the power is turned off,
unless they are readjusted.
● The date/time setting will be canceled if the camera is left with no batteries
for approximately 1 hour. If this happens, set the date/time again. If you
remove the batteries a short time after loading them in the camera, it may
take less than 1 hour for the date/time setting to be canceled.
18
Ññ
to select
GO
SELECT
É
.
SELECT
at the time of 00 seconds. The clock
SET
GO
screen
í
to move to
GO
SET

Publicidad

Tabla de contenido
loading

Tabla de contenido