Publicidad
Idiomas disponibles
Idiomas disponibles
Genius Remote Control. Rolling Code.
Every remote control is assigned a different code, you can program up to 4 codes (4 remotes). The
remote has 4 buttons, Button 1, Button 2, Button 3 and 4 button.
The alarm system is pre-programmed with a routine function for each button on the remote control.
Works with the following configuration:
Buttnn 1 Arm / Lock
Ignition OFF
Press and release button 1 to arm the alarm system.
Pressing button 2 within the first 3 seconds after arming the alarm system, the shock sensor is
excluded.
Ignition ON
Press and release the 1 button locks the doors Press for 3 seconds to activate the panic function
Button 2 Disarm / Unlock / Valet Mode
Ignition OFF
Press and release the 2 button to disarm the alarm system and unlock the doors, press again and
send the second pulse to unlock the doors
Ignition ON
Press and release, unlock doors
Press and hold for 3 seconds, enter or exit valet mode
Button 4 - Channel 2
Press the 4 button for 3 seconds, activate channel 2, which is used to open trunk.
Buttons 3 and 4 both - Chnnel 3
Press buttons 3 and 4 at the same time for 3 seconds activates channel 3 (see table programming
- channel 3)
Genius Car Alarm
Genius Car Alarms
Button 2
Button 4
www.geniuscaralarm.com
www.alarmasgenius.com
Button 1
Button 3
29
7
Publicidad
