Symbols And Warning Signs; Safety Regulations For The Cordless Shearing Machine - Kerbl constanta 2 Manual De Operación

1. Safety Regulations
1.1 In General
This section is about the safety regulations that must be observed when
installing, using and servicing the clipping machine.
All persons undertaking work on or with the machine have an obliga-
tion to read the operating instructions.
The operating instructions must be kept constantly accessible at the
operation place of the machine.

1.2 Symbols and Warning Signs

Various symbols are used in the operating instructions. They refer to
potential dangers or point to technical information, the non-observation
of which will lead to personal injury and damage to objects.
Danger Symbols
Warning
Indicates a potentially dangerous situation. If preventive action is not
STOP
taken, very serious injury or death could result.
Caution
Indicates a potentially dangerous situation. If preventive action is not
!
taken, the consequences could be minor or slight injuries.
Information Symbols
Note
Note, non-compliance which can lead to operating malfunctions or
damage.
Pictorial Note
This symbol together with its number refers to the relevant illustration
at the end of the operating instructions.
5 + 6

1.3 Safety Regulations for the Cordless Shearing Machine

• Do not expose the shearing machine or the charger to water or any
other liquids.
STOP
• Avoid damages of the cable:
• Guard the cable against sharp edges, oil and heat.
• In case you do not use the charger disconnect the plug from the
22
- do not pull the charger by the cable
- do not pull the mains plug by the cable.