Levenhuk DTX 500 LCD Guía Del Usario página 4

Date and time display
Select Date Stamp from the main menu and choose one of the existing settings. You can opt
to display the date or both date and time. Press OK to confirm selection.
TV connection
Select TV Out from the main menu and choose one of the existing settings. Press OK to
confirm selection.
Date and time
Select Date/Time from the main menu and set the current date and time. Press OK to
confirm entry. You can also choose one of the following date formats: YY/MM/DD, DD/MM/YY
or MM/DD/YY.
Format SD card
Select Format SD from the main menu to format the installed memory card.
Settings reset
Select Sys. Reset from the main menu to revert back to factory settings.
Hardware version
Select Version from the main menu to check the current hardware version.
Connecting the microscope to a TV-set
Plug the RCA cable into the microscope and connect it to your TV-set (refer to the User Guide
of your TV-set for additional information). Turn on the TV and select the correct channel from
the corresponding menu of the TV-set (refer to the User Guide of your TV-set for additional
information).
PortableCapture Pro software
Insert the installation CD into your CD drive. The Main Menu window will be displayed. Select
PortableCapture software to install the PortableCapture Pro application. Keep in mind that
a system restart will be required during installation.The installation CD contains a copy of
this User Guide, which you can read by clicking the corresponding entry in the Main Menu.
Connect the microscope to your PC with a USB cable and run the PortableCapture Pro
application. A pop-up message will warn you if the microscope is not connected to the PC.
Note: function keys are disabled when the microscope is connected to a computer as a
camera. The microscope is operated through the PortableCapture Pro application. All the
images and videos will be saved to the computer's hard drive.
4
Capture an image
Start and stop
video recording
Sequence capture (you can set the time to begin capturing images
or videos, interval between them, video duration and the number
of images or videos to be captured)
Full screen mode. To exit full screen mode, press Escape
on your keyboard or double-click anywhere on the screen
Save as
Copy to clipboard
Copy file
Previous image
Next image
Undo the last action
Repeat the last action
Draw
Text
Measurement
Calibration