MSA XTIRPA Pole Hoist System Manual De Instrucciones Y Seguridad página 15

(3.) Remove the middle section pin of the T-bar and adjust to the desired
height (A).
Fig. 7
(4.) Remove the handle pin of the pole hoist and install the T-bar.
Replace the handle pin to secure the pole hoist to the T-bar at the
desired angle (A).
Fig. 8
Always ensure that the pole hoist and the T-bar are in a stable working
position. Misuse may result in death or serious injury.
Step 3A
Step 4A
MSA/XTIRPA™ Pole Hoist System
Warning
Use
US
15