MSA XTIRPA Pole Hoist System Manual De Instrucciones Y Seguridad página 18

Use
(4.) Pass the cable or rope lifeline through the suspension hook and over
(5.) Attach the suspension hook to the anchorage point.
(6.) Install the SRL or winch on the mounting bracket (A) and lock with
US US
Use only MSA approved adapters and brackets. Misuse can result in
death or serious injury.
18
the swivel head pulley (A). Be assured that the cable or rope lifeline
is fully seated within the pulley groove (B).
Fig. 16 Step 4A
the pin attached to the SRL or winch bracket (B).
Fig. 18 Step 6A
MSA/XTIRPA™ Pole Hoist System
Fig. 17 Step 4B
Fig. 19 Step 6B
Warning