MSA XTIRPA Pole Hoist System Manual De Instrucciones Y Seguridad página 16

Use
(5.) Remove the locking pin from the mid section of the pole hoist (A)
(6.) Attach the suspension hook to the anchorage point. Adjust T-bar
US US
16
and extend to the desired position (B). Replace the locking pin to
secure the pole hoist.
Fig. 9 Step 5A
height, T-bar angle, or pole hoist extension as necessary to ensure
the pole hoist is in a stable working position (A). Disconnect the
suspension hook from the anchorage point to continue assembly.
Fig. 11 Step 6A
MSA/XTIRPA™ Pole Hoist System
Fig. 10 Step 5B