Before You Start; Network Setup - Wiseup WIFI09 Guia Del Usuario

II. What's in the Box
-1× WIFI Camera
-1× USB Cable
-1× AC110-240V to DC 5V Power Adapter
-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Before You Start
3.1 Before using, please make sure your camera is fully charged and make sure the Micro SD
card has been formatted already and is securely fitted into the camera's SD card slot, or it will
not work. We recommend you use a SDHC Class 10 Micro SD card.
3.2. Power the camera on by pressing the Power Button ponce. Wait about 15 seconds
or so, you will see the LAN indicator light is solid yellow, which means the camera's WIFI
signal is ready.
3.3. If you need the camera to work 24/7 days, please connect it to an outlet AC power
supply using the included USB cable and power adapter.
IV. Network Setup
4.1. Install the "Camwf" APP on your smartphone or tablet PC
Search for "Camwf" in Google Play Store or scan the QR code below to install the APP on
your smartphone or tablet PC.
4.2. P2P Connection Setup (LAN Mode)
4.2.1. Go to the WIFI or WLAN Setting page on your smartphone or tablet PC, connect your
mobile device to the camera's WIFI signal named "RT_*****". Wait for the WIFI to be
connected and your phone status bar will appear WIFI symbol as below: