Wiseup WIFI09 Guia Del Usuario página 5

4.3.1. Launch the "Camwf" APP.
4.3.2. Follow the steps below to set up remote view function:
Step 1: On the home page, tap the gear icon then choose "Camera setting" in the popup
window.
Step 2: On the "Advanced Setting" page, tap "manage WI-FI networks" at the "WIFI Setting"
section.
Step 3: Select a desired WIFI hotspot to enroll the camera in.
Step 4: Tap "OK" to complete the remote view setup and the camera will reboot automatically.
Step 5: Exit the "Camwf" APP.
[Note]:
If a wrong password is entered, or if the device failed to connect to the router, we recommend
you reset the camera to factory default in the P2P mode. To do this, press the Reset Button twice.
How to check if remote view function works?
1. Back to the WIFI or WLAN setting page on your phone or mobile device, exit your phone
or mobile device from the current WIFI network, enroll your phone or mobile device in another
WIFI hotspot, or you can turn off the WIFI or WLAN function, enable your mobile network
data.