[Note]:
If the camera's WIFI signal cannot be found after a long time, please reset it (See VIII) or
recharge the battery only if the camera is powered by it (See X).
4.2.2. Run the "Camwf" APP.
4.2.3. Add the camera to the "Camwf" APP as below:
Tap "+" icon > Search for the Camera > Tap the camera's UID > Tap OK.
4.2.4. If the camera shows "Online" on the home page, it means the camera's P2P (LAN)
setup is successful. The LAN indicator light will be solid yellow. You can check or record
video in the P2P (LAN) mode.
[Note]:
In this P2P (LAN) mode, you can only view video locally, within 15 meters (49 feet) open
range.