Set Open Time - hafele Dialock MDU 100 Instrucciones De Servicio

Terminal copy
Menu path:
Description:

Set open time

Menu path:
Description:
Example:
Main menu / Terminal functions /
Configuration /
Already existing configured terminal can be
copied once or several times. To do this,
activate data transfer (see page 61 „Data
exchange between MDU and terminal using the
infrared interface") on the "source" terminal and
transfer data to the MDU. Then activate data
exchange on the "target" terminal and copy the
data (room number, authorised keys, operating
mode, open time, time zone, macros etc.). The
room number can also be changed.
After successful data transfer, the signal "Data
transfered" appears.
Main menu / Terminal functions /
Configuration /
Open time is the period of time for which the
terminal keeps the locking unit unlocked after
an authorised key has been held in front of it.
The figure is entered in seconds and confirmed
with the key .
Dialock MDU 100 - status: 09.2013 - 732.29.197
Operating Instructions
69