EdilKamin INPELLET 54 Instalación Uso Y Mantenimiento página 27

NOTES ON FITTING THE COVERING
METAL FINISHING PROFILE FOR "FRAME" COATING ASSEMBLY
v/
1
v
COVERINGS, COUNTER-HOODS AND THEIR VENTILATION
Rather, at least 1 cm. (approx.) space must be left to allow air to flow, thereby preventing heat from accu-
mulating.
THE MANTEL CAN BE CONSTRUCTED WITH FIRE RESISTANT PANELS IN PLASTERBOARD OR
GYPSUM BOARD. AERATION GRILLES FOR PREVENTING ANY EXCESS TEMPERATURE INSIDE
MUST BE PROVIDED FOR DURING CONSTRUCTION.
During the construction phase of the covering it is fundamental to ensure that the combustion air is resto-
red to prevent pressure phenomena in the room where the fireplace is installed
(refer to the Chapter regarding the external air inlet on page 23)
INSTALLATION
v
v/
1
Z
X
Y
27