Publicidad
Furniture Wall Safety Strap
Hardware List
A
LONG SCREW 1 PC
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 5/16" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
PARKER 6 DRAWER DRESSER AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU HAVE ANY
STEP 1: ATTACH A METAL BRACKET (B) SECURELY TO THE BACK TOP RAIL OF
FURNITURE USING THE SHORT SCREW (C), THROUGH THE SMALLER HOLE.
STEP 2: LOCATE THE OTHER METAL BRACKET (B) ON THE WALL OVER A WALL STUD
AND 2 INCHES BELOW THE MOUNTING BRACKET SECURED TO THE BACK OF YOUR UNIT.
ATTACH TO THE WALL STUD USING THE LONG SCREW (A) PROVIDED, THROUGH THE
SMALLER HOLE.
STEP 3: PLACE THE FURNITURE INTO POSITION SO BOTH MOUNTING BRACKETS ARE
VERTICALLY IN LINE. LACE THE END OF THE SAFETY WALL STRAP (D) THROUGH THE
LARGER HOLE IN EACH MOUNTING BRACKET (B). BRING BOTH ENDS TOGETHER AND
SLIDE THE FLAT END THROUGH THE LOCKING END AND DRAW IT THROUGH UNTIL ALL
SLACK IS REMOVED.
STEP 4: CONFIRM THAT THE STRAP IS SECURELY LACED AND LOCKED.
TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY
REMOVE THE SCREW (A) FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.
B
METAL BRACKET 2 PCS
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITURE MAY TIP
OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHIND THE FURNITURE
TO ENSURE SAFETY.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
QUESTIONS, PLEASE CALL OUR CUSTOMER SERVICE NUMBER: 1-800-295-1980.
C
SHORT SCREW 1 PC
D
SAFETY WALL STRAP 1 PC
B
A
B
C E
Email:das@dorel.com
Publicidad
