Pausing Your Treatment - Philips Respironics I-neb AAD Guia Del Usuario

It will take a few breaths for the I-neb to
18
start delivering medication. When the
medication starts to be delivered, you will
feel a vibration with each breath. This lets
you know the medication is being delivered.
When the vibration stops, the I-neb is still
delivering medication. Continue to breathe
in for as long as possible. During the
treatment, the number showing your dose
will disappear. The battery symbol and face
will remain.
Continue to breath through the I-neb
19
until you hear the buzzer. The buzzer lets
you know that your medication has been
delivered and the treatment is complete. A
smiley face will appear on the screen. The
I-neb will automatically shut off at the end
of the treatment.

Pausing your treatment

12035_RRDD_InebPH_InstESUS_1056844_Issue1_v10.indd 13
5 Pausing your treatment
You may pause your treatment at any time
20
by removing the mouthpiece from your
mouth. If you do not breathe on your
I-neb for two minutes, it will go into 'pause
mode' (screen flashing). To continue your
treatment, pick up the I-neb and start
breathing through the mouthpiece. If you
do not start the treatment again within 10
minutes, the I-neb will automatically shut
off.
If the I-neb shuts off, you cannot restart
21
your treatment. You must take it apart,
empty the medication chamber, and clean it
as shown in step 30.
Caution
If you pause for more than 10 minutes, you will
not be able to continue your treatment session.
To continue your treatment, pick up the
22
I-neb and start breathing through the
mouthpiece. It will take a few breaths for
the I-neb to start delivering medication.
11
18/02/2010 12:23