Belkin TuneBase FM Manual Del Usuario página 14

Use YoUr TUneBase
sections
table of contents
If you cannot find a clear frequency by
using clearscan:
1. On your car stereo, tune to a frequency
that has a weak signal. For best results,
find a frequency that has only static.
2. On your TuneBase, press + or - to tune
to the same frequency.
3. You should be able to hear music from
your iPod clearly through your car
stereo.
TuneBase™ FM with Hands-Free
1 2
Adjust your car stereo's volume to get
the right level of sound. If the volume
remains too faint, increase the volume
on your iPod to boost the signal.
save clear frequencies
You can save two frequencies by pressing
and holding buttons 1 and 2.
1. On the TuneBase, tune to the frequency
you want to save.
2. Press and hold the preset button 1 or 2
for two seconds. You will hear a beep
when the frequency is saved and the
memory icon will flash on the screen.
3. Press and release the preset button to
tune the TuneBase to the station.
4. Tune your car stereo to the same
station.
12
3 4 5 6