Installing Remote Control Battery; Setting Up Your Boombox; Using The Ac Power Adapter - Insignia NS-B3113 Guia Del Usuario

Installing remote control battery

To install the remote control batteries:
1 Remove the battery holder from the remote control.
2 Insert the CR2025 battery into the battery holder, positive (+) side up.
3 Slide the battery holder back into the remote control.

Setting up your boombox

Using the AC power adapter

To use the AC power adapter:
1 Make sure that your local AC power source matches the voltage
shown on the plate located on the AC power adapter. If it does not,
consult your dealer or service center.
2 Insert the small connector at the end of the AC power adapter
cable into the DC IN jack on the back of your boombox.
12
Insignia NS-B3113 Boombox with iPod® Dock
Back view
Notes
Battery chemicals can cause a rash. If the battery leaks,
clean the battery compartment with a cloth. If chemicals
touch your skin, wash immediately.
If the remote control is not going to be used for an extended
period of time, remove the battery.
www.insignia-products.com