Before Welding; Markings - Sweiss SKYVIEW 610 Manual De Instrucciones

1. BEFORE WELDING

Auto-Darkening welding helmet is designed to protect the welders eyes from
harmful radiation including visible light, ultraviolet radiation (UV) and in f r a - r e d r
a d i a t i o n ( IR) r e s u l t ing f rom cer tain arc and gas we ld in g cesses when used
in accordance with these User Instructions.
This welding helmet is suitable for all types of electro-weldings:covered electrodes,
MIG/MAG,TIG/WIG, plasma welding,cutting and laser welding (only selected models
with two shade ranges i.e.5-8 and 9-13), except for gas welding.
Never place the helmet or the lter on hot surface.
- Use only within the temperature range of -10°C to+60°C.
- Do not immerse the lter (auto-dakening lter) in water.
- Do not expose the lter to liquids and protect it from dirt.
- Regularly replace the cracked-scratched protection cover lens. If this helmet
doesn't darken upon striking an arc, stop welding immediately and contact your
supervisor or your dealer.

2. MARKINGS

The lter is marked wi th the shade range and optical classi cation. The following is
an example(EN379) :
Dark shade DIN9-13
Make suret o remove any additiona l protection
foil from both sides of Protection Lens .
4 /
l
/ 9-13 SWG 1 1 1 2/EN379 CE / / /
1