Installation And Wiring - SORHEA UNIRIS II 50 Manual De Instalación

SORHEA
Channel 1
Channel 2
2

INSTALLATION AND WIRING

Removal / Reinstallation of the infrared cover
Removal:
1. Loosen the screw fastening the cover
2. Remove infrared cover.
2
Removal / Reinstallation of the infrared module
Removal:
1. Loosen cell screw.
2. Unfasten the module from the rail by levering it
up with the help of a flat screw driver.
Rail
Infrared
module
2
Cell
screw
When the barriers are stacked, make
sure they are configured with different
channels.
1
1
Reinstallation:
1. Insert hook of infrared cover into the plate, place
infrared cover so that the hook is correctly
positioned.
2. Close infrared cover on the plate.
3. Tighten fastening screw of infrared cover.
Reinstallation:
1. Insert the infrared module on the left part of the
rail, then use a flat screwdriver to help fasten it
onto the rail.
2. Tighten cell screw.
Cell
screw
Infrared
module
screw
- 12 -
3
1
2
Rail
1
Cell
UNIRIS II 50
2