Channel Selection - SORHEA UNIRIS II 50 Manual De Instalación

SORHEA
3

CHANNEL SELECTION

To prevent interference by one barrier with another on the same site, barriers are equipped with four
selectable frequencies (channels).
The receiver and its associated transmitter must be configured with the same channel number. This
configuration is performed by using switches 3 & 4 on the control unit.
The channel is confirmed by the receiver and the transmitter when the barrier's
power is turned on. (Once the barrier's power is turned on, the channel selection
switches have no effect when operated.)
When barriers are stacked (fig.1) or installed along the same line (fig. 2), select a different channel for
each barrier.
Transmitter
Transmitter
CHANNEL 1
Transmitter
Switch 3 and 4 :
Channel selection
ON
3 4
CHANNEL 1
CHANNEL 2
CHANNEL 1
Receiver Receiver
3 4 3 4
CHANNEL 2 CHANNEL 3
fig.1
fig. 2
CHANNEL 2
Transmitter Transmitter
- 15 -
UNIRIS II 50
ON
3 4
CHANNEL 4
Receiver
Receiver
CHANNEL 3
Receiver