Parts; Assembly - Truper ROTO-1/2N6 Manual De Instrucciones

Parts

Depth Impact-Rotation
Control Rod Selector
Handle
Chuck
Speed Continuous
Rotation
Auxiliary
Control Operation Button
Selection
Handle
Button
Power Cord
Protector
Switch
Power
Cable
Chuck Key
Holder
Chuck
Key

Assembly

3
1. Turn the auxiliary handle in a
clockwise direction while released so
Depth
that the opening in the mount gets
Control Rod
through freely over the chuck.
2. Insert the hammer drill head
Steps 1 & 2
through the auxiliary mount.
Mount
3. Insert the depth control rod into
the mount orifice.
4. Rotate the auxiliary handle
together with its mount until is set in
the right position to operate the tool.
4
The auxiliary mount is secure when
the handle notches assemble in the
gearbox.
5. Turn the auxiliary handle to firmly
set the mount onto the hammer drill
head.
Auxiliary
Handle
5
6
ENGLISH