Parts; Start Up; Charging The Battery - Truper ROTI-12AC Instructivo

Charge
and charge
process indicator
Battery
Charger

Charging the Battery

• Connect the adapter plug into a 127 V~power outlet.
The charge indicator green light will be ON.
• Insert the battery into the charger as shown in the
image.
• The green light will be OFF and the red light shall turn
ON indicating charging is in progress.
• When the battery is charged in full, the green light will
be back ON and the red light will turn OFF.
• Disconnect the adapter from the power outlet once
the charge finishes.
• If the green-light stays on, means the battery is
defective. Replace the battery with a new one.
• If the green-light stays on, means the battery
temperature is lower than 32 °F or higher than 113 °F.
Wait until the battery temperature gets to the right
temperature range to charge.
6
ENGLISH
Keyless Torque
Chuck Regulator
LED
Light
Switch
Adapter

Start Up

Parts

Speed
Selector
Direction of Rotation
and Blocking Button
Battery
1
2
Handle
Battery
Release
Button