Chauvet DJ FREEDOM PAR QUAD-4 Guida Rapida página 3

Overview
DMX In
Fuse Holder
Power In
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of disuse completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of Freedom Par Quad-4 products that you can power link at each voltage, see the User Manual
or the sticker on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Freedom Par Quad-4 QRG Rev. 8
QUICK REFERENCE GUIDE
Kickstand DMX Out
On/Off Power Out
Switch
Carry Handle
Microphone
LED Display
Infrared Sensor
Glare Shield
Battery Life
Indicator LEDs
D-Fi AUTO
Sync/Clear Button
EN
Menu Buttons
2