Smart Care - Samsung WF50K7500A Serie Manual Del Usuario

Maintenance

Smart Care

The Smart Care function helps you diagnose and troubleshoot your washer if it has a
problem. To enable this function, you must first download the Samsung Smart Washer app
from the Play Store or the Apple Store, and install it on a mobile device that has a camera.
The Smart Washer Smart Care function has been optimized for:
Galaxy and iPhone series devices. (It is not supported by some models.)
As the washer operates, it runs it's self-diagnosis function in the background. If it senses
a problem, it displays an information code on the display which you can scan using the
app's Smart Care function. The Smart Care function will then display detailed information
about the code.
1. Press and hold Super Speed on the washer for 3 seconds to enter the Smart Care mode.
2. Run the Samsung Smart Washer app on your mobile device, and then tap Smart Care.
3. Hold the mobile device so that the mobile device and the washer's display panel face
each other. The app will recognize the information code automatically.
4. When the information code is recognized correctly, the app provides detailed
information about the symptom and recommends further action.
NOTE
• The function name, Smart Care, may differ depending on your language.
• If the washer display is reflecting light, the app may fail to recognize the information
code.
• If the app fails to recognize the information code code a number of times
consecutively, enter the information code manually into the app screen.
English
52
WF7500K-DC68-03667A-02_EN.indd 52 2016/8/12 14:44:49