Pump filter
It is advisable to clean the pump filter 5 or 6 times a year to prevent it from clogging. A
clogged pump filter may reduce the bubble effect.
NOTE
If the pump filter is clogged, the "5C" information code appears on the washer's display
screen.
WF7500K-DC68-03667A-02_EN.indd 55
A
1. Turn off the washer, and then unplug
the power cord.
2. Drain the remaining water inside
the drum. See the "Emergency drain"
section on page 51.
3. Gently press the top area of the filter
cover to open.
4. Turn the pump filter knob (A) to the left,
and drain off the remaining water.
5. Clean the pump filter using a soft brush.
Make sure the drain pump propeller
inside the filter is unclogged.
6. Reinsert the pump filter, and then turn
the filter knob to the right.
7. Close the filter cover.
NOTE
• Some pump filters feature a safety
knob that is designed to prevent
accidents by children. To open the
safety knob of the pump filter, push in
and turn it counterclockwise. The spring
mechanism of the safety knob helps
open the filter.
• To close the safety knob of the pump
filter, turn it clockwise. The spring
makes a rattling sound, which is normal.
English 55
2016/8/12 14:45:01