Figure 3 Width And Height With Brackets - Federal Signal eSiren Instrucciones De Instalación Y Servicio

Installation and Maintenance Instructions
Mounting the eSiren without the Brackets
To mount the eSiren directly to the mounting surface:
1. Using the template included with the eSiren (doc. no
25500239, scribe the centers of the six mounting holes on
the mounting surface.
2. Drill a 9/32 in hole at each of the scribe marks.
3. Secure the eSiren from behind the surface with the
installer‑supplied 1/4 in x 20 screws. Note that the threads
in the cover have a depth of 0.5 in. Choose fasteners of the
appropriate length.
10

Figure 3 Width and height with brackets

27.74 cm
25.04 cm
12.70 cm
Model eSiren
10.92 in
8.93 in
22.68 cm
9.86 in
5.00
MOUNTING HOLES
2x Ø 0.40 in
2x Ø 10.16 mm