Charging Your Quest; Robot Vacuum - Hoover BH70600 Serie Guia Del Usuario

Charging your Quest

Charging your Robot before first use will extend it's battery life.
9
Robot Vaccum
TM
To charge your Quest , manually place it on the docking station
™
making sure the charging pins are aligned. A short beep and flashing
blue LED confirm that Quest
™
When Quest is fully charged (4.5 - 5.5 hours charging time), it will
™
beep and the blue LED will turn off.
Ambient charging temperature range: 32°F to 113°F (0°C to 45°C)
in properly docked for charging.
Battery pack can only
IMPORTANT:
be charged if toggle switch is put into "I/
ON" position.
WARNING
! !
Danger of injury! Only use the AC
adapter and docking station sup-
plied with the appliance to charge
this equipment.