Haier HBB 177 TNF Manual De Instrucciones página 26

The open channel at the rear is clearly shown. For the correct operation of the appliance it is
important that the top of the housing unit is not blocked off. A channel depth of 40-50mm is
normal with most units.
A ventilation hole is required in the plinth of the unit; this allows air to be drawn over the compressor
& heat exchange.
As a rule, the more air that can get in and out, the better and more efficient the operation of the
product.
Installation into the cabinet
With the help of another individual, or two, move the appliance into the
cabinet. There are two metal plates at the base of the appliance. Fit the
supplied white spacers to these plates. Ensure that the lips of the
cabinet base.
25