Activating The Menu; Navigating The Menu; Exiting The Menu; Menu: Brightness - Optelec ClearView C Manual Del Usuario

Optelec

Activating the menu

Navigating the menu

Exiting the menu

Menu: Brightness

This menu item allows you to adjust the brightness of the screen.
- Activate the menu by pressing the Menu button on the Advanced side
of the Control Pad.
- Use the Zoom dial to scroll through the menu items. Select the menu
option Brightness and activate this menu by pressing the Mode button.
- Select the brightness level by using the Zoom dial to decrease or
increase the brightness level. There are five brightness levels to
choose from. The default brightness level is set to 5.
- Press the Mode button to confirm your choice and exit the menu.

Menu: Color

The ClearView C supports four high contrast modes and the default photo
mode. For each of the four high contrast modes, the foreground and
background colors can be configured. Three of the high contrast modes can
be disabled if you prefer to work with one high contrast mode. By default
three are enabled: Full color photo mode, high contrast mode 1 white
English
To enter the menu, press the Menu button located at the
front in the middle of the Advanced side of the Control Pad.
To exit the menu, press the Menu button again.
Use the Zoom dial to scroll through the menu items. The
Mode button located in the middle of the Zoom dial will
activate the chosen menu item or confirm the selection.
To exit the menu, to go back to the previous menu level or
to cancel your choice, press the Menu button on the
Advanced side of the Control Pad.
ClearView C
Page 17