Optelec ClearView C Manual Del Usuario página 15

Optelec
4. Press the On / Off button and the Overview button simultaneously for
five seconds and release the buttons;
5. If the pairing procedure is successful, the pairing icon will disappear;
6. If the ClearView C does not recognize or see the Control Pad, the
pairing sequence will be terminated within 30 seconds and the pairing
icon will disappear. Repeat steps 1 to 5 until the Control pad is correctly
paired. Possible causes for an unsuccessful pairing are:
- The batteries of the Control Pad are empty;
- The wrong buttons were pressed to initiate the pairing process;
- The Control Pad is broken.
English
ClearView C
Page 15