Bradley SN2013/TT Manual De Instalación página 9

Installation
Optional Towel Dispensers and 4-Inch Shroud
Attach Slip Ring to ceiling . Use (5)
A
1/4" screws (provided by installer), in
a 6" diameter circle .
B
Attach Dispensers, using them as a
guide for positioning mounting brackets .
C
Using supplied screws, secure base
of shroud to the sprayhead cover .
D
Connect base of vent pipe to
drain as described in Step 3 .
Optional Dispenser Mounting Brackets for 1-1/2" Pipe
A Mount Brackets for a 1-1/2" pipe in a
similar manner to above . Secure brackets in
position using tie-bar supports as shown .
Bradley • 215-1762 Rev. A; ECN 14-00-007
Mounting Bracket
Soap Filler Cap
SN2013/TT, SN2033/TT
Vent Pipe (shown for
illustrative purposes)
Shroud
Pipe Cap
Mounting Bracket
Tie Bar
Spacer Sleeve
10/21/2014 9