Safety Information Operation; Connect Electric Appliances - brennenstuhl PMA DE V2 Instrucciones De Utilización Y De Seguridad

Safety information / Operation
KEEP ALL SAFETY INFORMATION AND
INSTRUCTIONS FOR FUTURE USE.
Avoid electrocution hazards!
Check the device, accessories and the electric
O
appliances to be connected for their condition.
Damaged appliances as well as broken power
cords or bare wires increase the risk of electric
shock.
Do not use the device if the power cords or plugs
O
of the connected appliances are damaged.
ATTENTION! Damaged power cords mean
danger to life.
The mains plug of the device must fit into the
O
power outlet. The plug may not be altered in any
way. Do not use adaptor plugs for protec-
tion-earthed electric appliances. Unchanged
power plugs reduce the risk of electric shock.
Unroll the power cord completely. Broken power
O
cords increase the risk of electric shock.
Avoid contact with earthed surfaces, such as
O
pipes, radiators, cooking stoves or refrigerators.
There is an increased risk of electric shock if
your body is earthed.
Keep the device away from rain and moisture.
O
Ingress of moisture increases the risk of electric
shock.
Use the device only in dry clothing and preferably
O
wearing shoes with rubber soles or standing
on an insulating mat.
Do not open the housing of the device in any
O
case. In case of damage or fault, have the
device repaired by experts only.
Do not use the device outdoors.
O
Unplug connected appliances from the sockets
O
directly holding the plug. Never pull on the
power cords.
Unplug the device from the power supply if
O
you do not use it anymore.
12 GB
PowerManager_Content_072016_EU.indd 12
Avoid injury and damage
of the product!
DANGER TO LIFE AND RISK
O
OF ACCIDENTS FOR INFANTS
AND CHILDREN! Never leave
children unattended with packaging material
and the product. There is the risk of suffocation
by the packaging material and electrocution
hazard. Children often underestimate dangers.
Keep children away from the product.
ATTENTION! EXPLOSION
O
HAZARD! Do not use the device in
a potentially explosive environment
with flammable liquids or gases.
Never exceed the specified maximum input
O
voltage.
Avoid strong vibrations.
O
Do not expose the device to extreme temperatures,
O
extreme solar radiation, humidity or moisture.
Do not expose the device to extreme temperature
O
fluctuations. Only use the device after it has
reached ambient temperature.
Do not use the device close to strong magnetic
O
fields, such as motors, transformers etc.
Do not connect several devices in a row.
O
Operation
Q

Connect electric appliances

q
ATTENTION! Make sure the master ON / OFF
switch is in position 0 before connecting electric
1
appliances.
7
Plug the power plug of the Power Manager
i
into a properly installed outlet.
Plug the power plug of the appliance into one
i
of the 6 sockets .
7
18.07.16 16:00